WindowsWake-on-LAN is set up through Device Manager. There are a few different settings to enable here: Open Device Manager . Find and open Network adapters. Ignore Bluetooth connections and virtual adapters. Double-click (or double-tap) Network adapters or select the + or > button next to it to expand that section.
Langkahpertama masuk Control Panel, Lalu pilih Network and Internet, Lalu pilih View Network and Sharing Center. Pada panel sebelah kiri pilih Change adapter setting. Lalu pada jendela networck connection, pilih adapter yang akan anda setting IP Address nya, Sebagai contoh saya pilih Local Area Connection.
Lets take Windows 11 as an example (the steps to change TCP/IP settings Windows 10 are basically the same). Open your Windows 11 computer. Click on the Start button and search for Settings.You can also press Windows + I to open Windows 11 Settings directly.; Select Network & internet from the left-side pane.; If you're using an Ethernet network, please click Ethernet in the right pane and

Toset the IP address, subnet mask, and default gateway from the control panel, follow the steps below. Configure the network interface for use on a TCP/IP network. Make sure the printer is turned on, and the LCD displays READY. Press Menu button on the printer to enter the printer's menu system. Press to highlight NETWORK SETUP, and then press .

DisableUnused Open Ports. Step 9. Save Your System Configuration Settings. Step 10. Configure NetFlow to Manage Your Cisco Switch (Optional) 1. Connect the Switch to PuTTY. To start configuration, you want to connect the switch console to PuTTY. You can do this by doing the following:
ForWi-Fi connection. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you're connected to. Under Properties, look for your IP address listed next to IPv4 address.
. 209 164 499 60 313 128 464 188

cara setting ip address lan windows 10